Card Type	Interface Converter
Chip Set	Unidentified
I/O Options	25-pin DTE port, 25-pin parallel port
Maximum Data Rate	115.2Kbps
Data Bus	External

CONNECTIONS
Function		Label	Function	Label
25-pin parallel port	CN1		25-pin DTE/DCE serial port	CN2

USER CONFIGURABLE SETTINGS
Setting	Label	Position
í Hardware flow control enabled	SW1/1	Off
Software flow control enabled	SW1/1	On
í LED indicator enabled	SW1/2	On
LED indicator disabled	SW1/2	Off

DATA FORMAT
Data	Parity	Stop Bits	SW1/3	SW1/4	SW1/5
í 8bits	No parity	1 stop bit	Off	Off	Off
8bits	Odd parity	1 stop bit	On	Off	Off
8bits	Even parity	1 stop bit	Off	On	Off
7bits	Odd parity	2 stop bits	On	On	Off
7bits	Even parity	2 stop bits	Off	Off	On
7bits	No parity	2 stop bits	On	Off	On
7bits	Odd parity	1 stop bit	Off	On	On
7bits	Even parity	1 stop bit	On	On	On

DATA RATE
Setting	SW1/6	SW1/7	SW1/8
1200bps	Off	Off	On
2400bps	On	Off	On
4800bps	On	On	Off
9600bps	Off	On	On
19.2Kbps	On	On	On
í 38.4Kbps	Off	Off	Off
57.6Kbps	On	Off	Off
115.2Kbps	Off	On	Off

LED
LED Codes	Color	Condition
· · - · ¾ · · - · ¾	Red	Computer is sending data
· ¾ · ¾ · ¾	Red	Serial device is connected; computer is not sending data
· · ¾ · · ¾	Red	Serial and parallel device is connected; computer is not sending data
· - · ¾ · - · ¾	Red	Printer not ready; data held in buffer
· · · · ¾ · · · ·	Red	Computer ignoring flow control; data lost
Note: LED blinks to show data activity. (· ) Dot indicates blink, (- ) short line indicates short pause, and (¾ ) long line indicates long pause.