PATTON ELECTRONICS COMPANY
1004A
Card Type |
Modem (asynchronous) |
Chip Set |
Unidentified |
I/O Options |
Line in, serial port (RS-232) |
Maximum Transfer Rate |
115.2Kbps |
Topology |
Star, Daisy-Chain |
Data Bus |
External |
CONNECTIONS | ||||||
Function |
Label |
Function |
Label | |||
DB-25 connector |
CN1 |
RJ-11 connector |
CN2 | |||
Note: An RJ-45, a terminal block, or a dual modular connector may be available in place of the RJ-11 connector. |
USER CONFIGURABLE SETTINGS | ||
Function |
Label |
Position |
í RTS/CTS delay enabled (8 msec) |
SW1/3 |
On |
RTS/CTS delay disabled |
SW1/3 |
Off |
í Echo mode disabled |
SW1/4 |
Off |
Echo mode enabled |
SW1/4 |
On |
í Carrier control method always enabled |
SW1/5 |
Off |
Carrier control method controlled by RTS |
SW1/5 |
On |
í Receive impedance low (120ohm) |
SW1/6 |
On |
Receive impedance high (16Kohm) |
SW1/6 |
Off |
í DCE setting |
SW2 |
On |
DTE setting |
SW2 |
Off |
(TRANSMIT OFF) IMPEDANCE | ||
Function |
SW1/1 |
SW1/2 |
í High impedance |
On |
On |
Intermediate impedance |
Off |
Off |
WIRE MODES | ||
Function |
SW1/7 |
SW1/8 |
2-wire mode |
On |
On |
4-wire mode |
Off |
Off |