NEWCOM, INC.
NEWTALK DSVD (NO COM IRQ JUMPER)
Card Type |
Modem (asynchronous) |
Chipset |
Phylon PHY2000 |
I/O Options |
Audio line in, audio line out, microphone in, voice, speakerphone, DSVD |
Maximum Data Rate |
33.6Kbps |
Maximum Fax Rate |
14.4Kbps |
Data Modulation |
ITU-T V.22, V.32, V.32bis, V.34 |
Fax Modulation |
ITU-T V.17, V.21CH2, V.27ter, V.29 |
Error Correction/Compression |
V.42, V.42bis |
Fax Class |
Class I |
Data Bus |
16-bit ISA |
Card Size |
Full height, half length |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Telephone line |
CN1 |
Microphone in |
CN4 |
Telephone line |
CN2 |
Audio line in |
CN5 |
Audio line out |
CN3 |
USER CONFIGURABLE SETTINGS | ||
Setting |
Label |
Position |
í DSP base I/O address is 380h |
JP3 |
Pins 1 & 2 closed |
DSP base I/O address is 300h |
JP3 |
Pins 2 & 3 closed |
DSP INTERRUPT SELECTION | |||||
Setting |
JP2/A |
JP2/B |
JP2/C |
JP2/D |
JP2/E |
7 |
Closed |
Open |
Open |
Open |
Open |
10 |
Open |
Closed |
Open |
Open |
Open |
í 11 |
Open |
Open |
Closed |
Open |
Open |
12 |
Open |
Open |
Open |
Closed |
Open |
15 |
Open |
Open |
Open |
Open |
Closed |
SUPPORTED STANDARD COMMANDS |
Basic AT Commands |
+++, 'comma', A/ |
A, D, E, L, M, N, P, Q, T, V, W, X, Z |
&D, &F, &K, &P, &T |
Extended AT Commands |
%C, %E |
S-Registers |
S0, S7, S10, S91 |
Note: See MHI help file for complete information. |
UNIDENTIFIED COMMANDS | |
Command |
Default |
S95 |
Unidentified |
Proprietary AT Command Set
See NEWCOM, INC. NEWTALK DSVD (WITH COM IRQ JUMPER) for a full command summary.