HwMuseum | Index

E-TECH RESEARCH, INC.

PC336ECA, PC336ECA-WT

Card Type

Sound card, modem (asynchronous)

Chipset

Unidentified

I/O Options

Audio line in, microphone in, speaker out, voice, speakerphone

Maximum Data Rate

33.6Kbps

Maximum Fax Rate

14.4Kbps

Data Modulation

Bell 103A, 212A

ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34

Fax Modulation

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

Fax Class

Class I

Data Bus

16-bit ISA

Card Size

Full height, half length

CONNECTIONS

Function

Label

Function

Label

Telephone line out

CN1

Audio line in

CN4

Telephone line in

CN2

Speaker out

CN5

Microphone in

CN3

   

USER CONFIGURABLE SETTINGS

Setting

Label

Position

í Speaker right out amplified

JP1

Pins 1 & 2 closed

Speaker right out not amplified

JP1

Pins 2 & 3 closed

í Speaker left out amplified

JP2

Pins 1 & 2 closed

Speaker left out not amplified

JP2

Pins 2 & 3 closed

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Z

&C, &D, &F, &K, &P, &T, &V, &W, &Y, &Z

Extended AT Commands

\A, \B, \G, \K, \L, \N

%C, %E

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S21, S22, S23, S27, S28, S32

S33, S46, S86

Note: See MHI help file for complete information.

IS-101 COMMANDS

+V Commands

+VDR, +VEM, +VGR, +VGT, +VIP, +VLS, +VNH, +VRX, +VSD, +VSP, +VTD, +VTS, +VTX

Other Commands

#VCID

Note: The functions of the IS-101 commands are unidentified.

UNIDENTIFIED COMMANDS

Command

Default

S31

194

S40

104

S41

195

Proprietary AT Command Set

DISPLAY CHIPSET MANUFACTURER

Type:

Immediate

Format:

AT [cmds] #MFR? [cmds]

Description:

Displays the voice chipset manufacturer’s name.

DISPLAY CHIPSET MODEL NAME

Type:

Immediate

Format:

AT [cmds] #MDL? [cmds]

Description:

Displays the model name of the modem's voice chipset.

DISPLAY CHIPSET REVISION

Type:

Immediate

Format:

AT [cmds] #REV? [cmds]

Description:

Displays the revision level of the modem's voice chipset.

DISPLAY INFORMATION

Type:

Immediate

Format:

AT [cmds] In [cmds]

Description:

Displays information requested about the modem.

Command

Function

I0

Displays product identification code.

I1

Displays ROM checksum.

I2

Displays DSP firmware revision.

I3

Displays chipset firmware revision, model, and interface.

I4

Displays OEM response.

VOICE DEVICE

Type:

Configuration

Format:

AT [cmds] #VLS=n [cmds]

Description:

Selects the I/O device for the DSP chip.

Note:

This modem may not support all options listed below. The #VLS? command will display the available options.

Command

Function

í #VLS=0

Telephone line and handset used for voice I/O.

#VLS=1

Telephone handset used for voice I/O.

#VLS=2

Internal speaker only used for voice I/O.

#VLS=3

External microphone only used for voice I/O.

#VLS=4

Telephone line and handset used for voice I/O; internal speaker enabled.

#VLS=5

Headset used for voice I/O.

#VLS=6

Speakerphone used for voice I/O.

#VLS=7

Handset muted by disconnecting handset or speakerphone from telephone line.

#VLS=8

Connects caller ID relay for recording of conversation over handset.

#VLS=9

Connects handset (or speakerphone) to DSP chip for recording or playback.

VOICE RECEIVE

Type:

Immediate

Format:

AT [cmds] #VRX

Description:

Commands the modem to begin receiving voice data.

VOICE TRANSMIT

Type:

Immediate

Format:

AT [cmds] #VTX

Description:

Commands the modem to begin transmitting voice data.