HwMuseum | Index

EICON TECHNOLOGY CORPORATION

EICONCARD S51

Card Type

ISDN TA

Chip Set

Motorola

Transfer Rate

64Kbps x 2

ISDN Protocol

PPP, SDLC, HDLC

Error Correction/Compression

Generic Lempel-Ziv

I/O Options

Daughterboard headers

Switch Type

Unidentified

Data Bus

16-bit ISA

CONNECTIONS

Function

Label

Function

Label

V.24, V.35, or X.21 port

CN1

Compression daughterboard headers

CN3 & CN4

ISDN line

CN2

   

Note: CN1 is a 3-row DB-26 connector. Standard port configurations are provided by included adaptor cables.

CN2 is a 4-pin Mini-DIN connector. A standard RJ-45 jack is provided by an included adaptor cable.

USER CONFIGURABLE SETTINGS

Setting

Label

Position

»

V.24 or V.35 interface

JP1

Pins 1 & 2 closed

 

X.21 interface

JP1

Pins 2 & 3 closed

»

Card will use primary I/O address

SW1/1

Off

 

Card will use secondary I/O address

SW1/1

On

Note: A single-block jumper is provided for JP1. It closes all pins 1 & 2 or all pins 2 & 3 simultaneously.

BASE I/O ADDRESS

Primary

Secondary

SW1/2

SW1/3

SW1/4

 

278h

678h

Off

Off

Off

 

280h

680h

Off

Off

On

 

378h

778h

Off

On

Off

»

380h

780h

Off

On

On

 

380h

780h

On

Off

Off

 

388h

788h

On

Off

On

 

390h

790h

On

On

Off

 

398h

798h

On

On

On

Note: If a card is set to use a secondary address, no other card in the system may be set to its associated primary address except for another EiconCard.