ADC KENTROX
DATASMART MODEL 72681
Card Type |
DSU |
Chip Set |
Unidentified |
I/O Options |
AC power, RJ-45 DCE port, V.35 DTE port network interface via RJ-48 connector |
DDS Transfer Rate |
64Kbps |
Line Coding |
AMI |
Data Bus |
External |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Network interface (RJ-48 connector) |
CN1 |
V.35 DTE port |
CN3 |
DCE port (RJ-45 connector) |
CN2 |
AC power connector |
CN4 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
PWR |
Green |
On |
Power is on and passed self diagnostic test |
PWR |
Green |
Blinking |
User is logged in |
PWR |
Green |
Off |
Power is off |
FAIL |
Red |
On |
Unit failed self diagnostic test |
FAIL |
Red |
Blinking |
Software is being downloaded |
FAIL |
Red |
Off |
Unit passed self diagnostic test |
ALM |
Red |
On |
LOS, OOF, or DDS alarm condition detected on network |
ALM |
Red |
Off |
LOS, OOF, or DDS alarm condition not detected on network |
DATA |
Green |
On |
Unit is ready to transmit/receive data on network interface |
DATA |
Green |
Off |
Alarm condition on network is preventing data exchange |
TEST |
Yellow |
On |
Unit is conducting a loopback test |
TEST |
Yellow |
Off |
Unit is not conducting a loopback test |
CTS |
Yellow |
On |
CTS signal is high. Unit ready to exchange data with the DTE |
CTS |
Yellow |
Off |
CTS signal is low |
RTS |
Yellow |
On |
RTS signal is high |
RTS |
Yellow |
Off |
CTS signal is low |
FRL |
Unidentified |
Off |
Frame relay link indicator; non-functional in current model |