ASCEND COMMUNICATIONS, INC.
PIPELINE 400 T1
|
Card Type |
T1 Remote Access Server |
|
Chip Set |
Unidentified |
|
I/O Options |
Power connector, 10BaseT Hut via RJ-45 connectors (12), 15-pin AUI port, BNC connector, UTP interface via RJ-45 connector T1/PRI interface via RJ-45 connectors (2), 9-pin serial port |
|
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
|
Ethernet Transfer Rate |
10Mbps |
|
T1 Transfer Rate |
Unidentified |
|
ISDN Rate |
Unidentified |
|
ISDN Modulation Protocol |
PPP, SLIP, X25, MLPPP |
|
Error Correction/Compression |
Unidentified |
|
Data Bus |
External |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Power |
CN1 |
10BaseT Hut (optional) |
CN5-CN16 |
|
9-pin serial port |
CN2 |
15-pin AUI port |
CN17 |
|
T1/PRI interface (RJ-45) |
CN3 |
BNC connector |
CN18 |
|
T1/PRI interface (RJ-45) |
CN4 |
UTP interface (RJ-45) |
CN19 |
|
DIAGNOSTIC LED(S) | |||
|
LED |
Color |
Status |
Condition |
|
PWR |
Unidentified |
On |
Power is on |
|
PWR |
Unidentified |
Off |
Power is off |
|
ACT |
Unidentified |
Blinking |
Data is being transmitted/received on Ethernet interface |
|
ACT |
Unidentified |
Off |
Data is not being transmitted/received on Ethernet interface |
|
COL |
Unidentified |
Blinking |
Collisions are being detected on Ethernet interface |
|
COL |
Unidentified |
Off |
Collisions are not being detected on Ethernet interface |
|
WAN |
Unidentified |
On |
WAN session is active |
|
WAN |
Unidentified |
Blinking |
Error detected on BRI interface |
|
WAN |
Unidentified |
Off |
Connection is broken on BRI interface |
|
CON |
Unidentified |
On |
Unit is connected to power source; power-up test in progress |
|
CON |
Unidentified |
Off |
Unit is not connected to power source; power-up test not in progress |