Card Type	Modem (asynchronous)
Chipset	Unidentified
I/O Options	Speakerphone, voice, microphone in, speaker out
Maximum Data Rate	56Kbps
Maximum Fax Rate	14.4Kbps
Data Modulation	Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 U.S. Robotics x2
Fax Modulation	ITU-T V.17, V.21CH2, V.27ter, V.29
Error Correction/Compression	MNP5, V.42, V.42bis
Fax Class	Class I
Data Bus	16-bit ISA
Card Size	Full height, half length

CONNECTIONS
Function	Label	Function	Label
Telephone line in	CN1	Microphone in	CN3
Telephone line out	CN2	Speaker out	CN4

INTERRUPT SELECTION
Setting	JP2/A	JP2/B	JP2/C	JP2/D	JP2/E	JP2/F	JP2/G
3	Closed	Open	Open	Open	Open	Open	Open
4	Open	Closed	Open	Open	Open	Open	Open
5	Open	Open	Closed	Open	Open	Open	Open
7	Open	Open	Open	Closed	Open	Open	Open
10	Open	Open	Open	Open	Closed	Open	Open
11	Open	Open	Open	Open	Open	Closed	Open
12	Open	Open	Open	Open	Open	Open	Closed
í Plug-N-Play	Closed	Closed	Closed	Closed	Closed	Closed	Closed

PLUG-N-PLAY
Setting	JP2/H	JP2/I	JP2/J
í Enabled	Closed	Closed	Closed
Disabled	Open	Open	Open

SERIAL PORT ADDRESS SELECTION
Setting	JP1/A	JP1/B	JP1/C	JP1/D
3F8h (COM1:)	Open	Open	Closed	Closed
2F8h (COM2:)	Closed	Open	Open	Closed
3E8h (COM3:)	Open	Closed	Closed	Open
2E8h (COM4:)	Closed	Closed	Open	Open
í Plug-N-Play	Open	Open	Open	Open

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, C, D, E, H, L, M, Q, V

&C, &F, &K

Extended AT Commands

\G, \Q

%C

S-Registers

The S-registers are unidentified.

Note: See MHI help file for complete information.

EXTENDED RESULT CODES
Type:	Configuration
Format:	AT [cmds] Wn [cmds]
Description:	Selects the format of the CONNECT result code.
Command	Function
í W0	CONNECT result codes to report DTE speed.
W1	CONNECT result codes to report DTE speed.
W2	CONNECT result codes to report DCE speed.
W3	CONNECT result codes to report DTE speed and error correction/compression.
W4	CONNECT result codes to report DTE speed, modulation, and error correction/compression.