Device Type	External Tape Drive
Interface	SCSI-2
Format	DDS-3
Sustained Transfer Rate	1 MBPS (native), 2 MBPS (compressed)
Size	5.25 in. full height
View	Top

AUTOLOADER OPTIONS

Note: To configure the AutoLoader options, press the buttons on SW2 until the desired option number

appears in the viewing window. Default value is 4.

DRIVE SELECT ID

Note: To set the SCSI ID, press the buttons on SW1 until the desired SCSI ID number appears in the

viewing window. Default value is 6.

MANUFACTURERS RECOMMENDED MEDIA

Tape

Sony 60m (DG-60M)

Fuji 90m (DG-90M)

Fuji 120m (DG-120M)

Sony 125m (DGD-125m)

Fuji 125m (DG3-125m)

Maxell 125m (HS 4/125s)

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Green	On	A tape magazine is loaded in the drive
LED1	Green	Blinking	A tape magazine is being loaded in the drive or self-test in progress
LED1	Green	Off	A tape magazine is not loaded in drive
LED2	Green	On	A cartridge is loaded in the drive
LED2	Green	Blinking fast	The drive is reading/writing or tape activity other than loading/unloading in progress.
LED2	Green	Blinking slow	A cartridge is being loaded in drive or self-test in progress
LED2	Green	Off	No tape activity
LED3	Amber	On	A fatal hardware error has occurred
LED3	Amber	Blinking	A non-fatal error has occurred
LED3	Amber	Off	Drive operation is good