PENRIL DATABILITY NETWORKS
VISTA VCP-1000
Card Type |
Ethernet router |
Chip Set |
Unidentified |
I/O Options |
NIC module, line interface module (4) |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
1, A, B, and C button |
B1 |
ENTER button |
B10 |
2, D, E, and F button |
B2 |
0, dash, comma, and underscore button |
B11 |
3, G, H, and I button |
B3 |
DELETE button |
B12 |
4, J, K, and L button |
B4 |
LEFT button |
B13 |
5, M, N, and O button |
B5 |
UP button |
B14 |
6, P, Q, and R button |
B6 |
DOWN button |
B15 |
7, S, T, and U button |
B7 |
RIGHT button |
B16 |
8, V, W, and X button |
B8 |
Power switch |
SW1 |
9, Y, Z, and period button |
B9 |
NIC Type |
Ethernet |
Processor |
80186 |
Processor Speed |
20MHz |
Chip Set |
Intel 82856 |
Maximum Onboard Memory |
2MB DRAM/128K static RAM |
I/O Options |
PCMCIA Type I slot |
Maximum network Rate |
10Mbps |
Data Bus |
Proprietary |
Topology |
Linear Bus/Star |
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Unshielded twisted pair |
J1 |
AUI transceiver via DB-15 port |
J3 |
RG-58A/U 50ohm coaxial |
J2 |
PCMCIA Type I slot for memory card |
J4 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Green |
On |
10Base-T network connection is good |
LED1 |
Green |
Off |
10Base-T network connection is broken |
LED2 |
Green |
Blinking |
Network activity detected |
LED2 |
Red |
On |
Coaxial network connection is broken |
LED2 |
Red |
Blinking |
Network collisions detected |
LED2 |
N/A |
Off |
Network activity not detected |
NIC Type |
Ethernet |
Processor |
80186 |
Processor Speed |
10MHz |
Chip Set |
Intel 82586 |
Maximum Onboard Memory |
512KB DRAM/64K NVRAM/64KB static RAM |
Maximum network Rate |
10Mbps |
Data Bus |
Proprietary |
Topology |
Linear Bus/Star |
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Unshielded twisted pair |
J1 |
AUI transceiver via DB-15 port |
J3 |
RG-58A/U 50ohm coaxial |
J2 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
LED1 |
Red |
Blinking |
Network activity detected |
LED1 |
Red |
Off |
Network activity not detected |
LED2 |
Green |
On |
10Base-T network connection is good |
LED2 |
Green |
Off |
10Base-T network connection is broken |
Card Type |
Serial |
Processor |
Unidentified |
Processor Speed |
Unidentified |
Chip Set |
Unidentified |
Maximum Onboard Memory |
Unidentified |
I/O Options |
Serial ports (8) |
Data Bus |
Proprietary |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Serial ports 1 - 8 |
CN1-CN8 |
Connector for VCP-1000 |
W1 |
Card Type |
Serial |
Processor |
Unidentified |
Processor Speed |
Unidentified |
Chip Set |
Unidentified |
Maximum Onboard Memory |
Unidentified |
I/O Options |
Serial ports (32) |
Data Bus |
Proprietary |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Serial ports 1 - 32 |
CN1-CN4 |
Connector for VCP-1000 |
W1 |
Serial ports 1 - 32 |
J1-J32 | ||
Note:The backplane of this card will have either J1-J32 installed or CN1-CN4 installed, but not both. |