MACROMATE
MN-600 PCI-BUS
NIC Type |
Ethernet |
Network Transfer Rate |
10Mbps |
Data Bus |
32-bit PCI |
Topology |
Linear Bus, Star |
Wiring Type |
Unshielded twisted pair AUI transceiver via DB-15 port RG-58A/U 50ohm coaxial |
Boot ROM |
Not available |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
AUI transceiver via DB-15 port |
CN1 |
RG-58A/U 50ohm coaxial port |
CN3 |
Unshielded twisted pair port |
CN2 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
Short heartbeat disabled |
JP4 |
Pins 2 & 3 closed |
Short heartbeat enabled |
JP4 |
Pins 1 & 2 closed |
PCI INTERRUPT SELECTION | ||||
Setting |
JP2/A |
JP2/B |
JP2/C |
JP2/D |
INTA |
Closed |
Open |
Open |
Open |
INTB |
Open |
Closed |
Open |
Open |
INTC |
Open |
Open |
Closed |
Open |
INTD |
Open |
Open |
Open |
Closed |
CABLE TYPE SELECTION | ||
Type |
JP3 | |
AUI transceiver via DB-15 port |
Pins 1 & 2 closed | |
» |
RG-58A/U 50ohm coaxial |
Pins 2 & 3 closed |
» |
Unshielded twisted pair |
Pins 2 & 3 closed |
DIAGNOSTIC LED(S) | ||
LED |
Status |
Condition |
LED1 |
On |
10Base-T network connection is good |
LED1 |
Off |
10Base-T network connection is broken |
LED2 |
On |
Data is being transmitted/received |
LED2 |
Off |
Data is not being transmitted/received |
Note: The locations of LED1 and LED2 are unidentified. |