IBM CORPORATION
PCI TOKEN RING ADAPTER
PCI WAKE ON LAN TOKEN-RING ADAPTER,
Card Type |
Network Interface card |
NIC Type |
Token Ring |
Boot ROM |
Unavailable |
Network Transfer Rate |
16/4Mbps |
Topology |
Star |
Wire Type |
Unshielded twisted pair Shielded twisted pair |
Data Bus |
32-bit PCI |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
9-pin serial port |
CN1 |
RJ-45 UTP connector |
CN2 |
DIAGNOSTIC LED(S) | ||
LED 1 (Amber) |
LED 2 (Green) |
Condition |
Blinking |
Blinking |
Adapter is active and awaits initialization |
Off |
Off |
Power is off or initialization is in progress |
Off |
Blinking |
Self diagnosis detected no problems, waiting to open |
Off |
On |
The adapter is open and operational |
On |
Off |
Self diagnosis failed. A problem exists |
Blinking |
Off |
Adapter is closed. A problem exists |
Blinking |
On |
Adapter has detected beaconing or a hard error |
On |
On |
Adapter has failed before self-diagnostic test. |