DANPEX CORPORATION
EW-1000
NIC Type |
Ethernet |
Transfer Rate |
10Mbps |
Data Bus |
8-bit ISA |
Topology |
Linear Bus |
Wiring Type |
RG58A/U 50ohm coaxial AUI transceiver via DB-15 port |
Boot ROM |
Not available |
CABLE TYPE | ||
Type |
W1A - W1F | |
» |
RG58A/U 50ohm coaxial |
Closed |
AUI transceiver via DB-15 port |
Open |
ETHERNET VERSION | ||
Setting |
W2 | |
» |
Version 2 (IEEE 802.3) |
Open |
Version 1 |
Closed |
SEGMENT LENGTH | ||
Maximum Length |
W3 | |
» |
185 meters |
Closed |
300 meters |
Open | |
Note:The cable segment length option is only valid when the cable type is RG58A/U 50ohm coaxial.
|
WAIT STATE | |||
Setting |
PC/AT System speed |
W4A | |
» |
4 wait states |
8 - 16MHz |
Open |
2 wait states |
6MHz |
Closed | |
Note:This option is ignored if the card is installed in an IBM PC, PC/XT, or PS/2 Model 30. |
I/O BASE ADDRESS | |||||
Address |
W4B |
W4C |
W4D |
W4E | |
200h |
Closed |
Closed |
Closed |
Closed | |
220h |
Open |
Closed |
Closed |
Closed | |
240h |
Closed |
Open |
Closed |
Closed | |
260h |
Open |
Open |
Closed |
Closed | |
» |
280h |
Closed |
Closed |
Open |
Closed |
2A0h |
Open |
Closed |
Open |
Closed | |
2C0h |
Closed |
Open |
Open |
Closed | |
2E0h |
Open |
Open |
Open |
Closed | |
300h |
Closed |
Closed |
Closed |
Open | |
320h |
Open |
Closed |
Closed |
Open | |
340h |
Closed |
Open |
Closed |
Open | |
360h |
Open |
Open |
Closed |
Open | |
380h |
Closed |
Closed |
Open |
Open | |
3A0h |
Open |
Closed |
Open |
Open | |
3C0h |
Closed |
Open |
Open |
Open | |
3E0h |
Open |
Open |
Open |
Open |
INTERRUPT REQUEST | |||||||
IRQ |
W5A |
W5B |
W5C |
W5D |
W5E |
W5F | |
2/9 |
Open |
Open |
Open |
Open |
Open |
Closed | |
» |
3 |
Open |
Open |
Open |
Open |
Closed |
Open |
4 |
Open |
Open |
Open |
Closed |
Open |
Open | |
5 |
Open |
Open |
Closed |
Open |
Open |
Open | |
6 |
Open |
Closed |
Open |
Open |
Open |
Open | |
7 |
Closed |
Open |
Open |
Open |
Open |
Open |