Card Type	Network Interface Card
NIC Type	Ethernet
Boot ROM	Not available
Radio Data Rate	3Mbps
Network Transfer Rate	1.6Mbps
Topology	Ad-hoc, infrastructure
Wiring Type	Unshielded twisted pair
Data Bus	External

CONNECTIONS
Function	Label	Function	Label
RJ-45 UTP connector	CN1	RJ-45 UTP connector	CN4
RJ-45 UTP connector	CN2	Monitor connector	CN5
RJ-45 UTP connector	CN3
Note: DC power connector is located along the side panel

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Power is on
LED1	Unidentified	Off	Power is off
LED2	Unidentified	Blinks	Radio interference is present
LED2	Unidentified	Off	No radio interference
LED3	Unidentified	On	Data is being transmitted over Ethernet
LED3	Unidentified	Off	Data is not being transmitted over Ethernet
LED4	Unidentified	On	Receiving traffic from 9 or more stations
LED4	Unidentified	Off	Receiving traffic from less than 9 stations
LED5	Unidentified	On	Receiving traffic from 5-8 stations
LED5	Unidentified	Off	Receiving traffic from less than 5 stations
LED6	Unidentified	On	Receiving traffic from 1-4 stations
LED6	Unidentified	Off	No traffic being received

MISCELLANEOUS TECHNICAL NOTES

Unit may have two pre-installed antenna, or configured with two connectors for external antenna.