NIC Type	Fiber Channel
Processor	Intel i960
Processor Speed	33MHz
Chipset	Ancor Communications VHSCI 4
Maximum Onboard Memory	2MB VRAM/512KB SRAM/256KB Flash ROM/128KB ROM
Network Transfer Rate	265.6125Mbps (FCS 266 PCI) 1062.5Mbps (FCS 1062 PCI)
Data Bus	32-bit PCI
Topology	Star/Peer-Peer
Wire Type	Fiber optic cable
Boot ROM	Not available

CONNECTIONS
Function	Label	Function	Label
Receive fiber optic SC connector	CN1	Transmit fiber optic SC connector	CN2

USER CONFIGURABLE SETTINGS
Setting		Label	Position
»	Factory configured - do not alter	JP1	Open

DIAGNOSTIC LED(S)
LED	Color	Status	Condition
LED1	Unidentified	On	Card is receiving data
LED1	Unidentified	Off	Card is not receiving data
LED2	Unidentified	On	Card is transmitting data
LED2	Unidentified	Off	Card is not transmitting data
LED3	Green	Blinking	Normal operation
LED3	Green	1 blinks	EPROM failed checksum test
LED3	Green	2 blinks	Processor memory failed self-test
LED3	Green	3 blinks	Buffer memory failed self-test
LED3	Green	4 blinks	FPGA failed self-test
LED3	Green	5 blinks	Flash ROM failed checksum test
LED3	Green	6 blinks	Flash ROM ID failed self-test
LED3	Green	7 blinks	OLC loopback test failed
LED3	Green	8 blinks	Chipset register failed self-test
LED3	Green	9 blinks	Timer failed self-test
LED3	Green	Off	Power is off or processor is not functioning