3COM CORPORATION
FDDILINK (3C796)
NIC Type |
FDDI |
Processor |
68000 |
Processor Speed |
Unidentified |
I/O Options |
Optical bypass relay |
Maximum Onboard Memory |
1MB RAM |
Boot ROM |
Not available |
Network Transfer Rate |
100Mbps |
Topology |
Ring |
Wire Type |
Fiber optic cable |
Data Bus |
32-bit PCI |
Card Size |
Full height, half length |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
Optical bypass relay |
CN1 |
Secondary fiber optic SC cable connector |
CN3 |
Primary fiber optic SC cable connector |
CN2 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
PHYA |
Green |
On |
Network connection on primary connector is good |
PHYA |
Green |
Blinking |
Card is attempting to connect to network via primary connector |
PHYA |
Green/Yellow |
Alternating |
Card is on standby mode, or card not functioning properly |
PHYA |
Yellow |
On |
Network connection on primary connector is broken or self-test failed |
PHYA |
Yellow |
Blinking |
Network topology on primary connector is invalid |
PHYA |
N/A |
Off |
Card is not receiving power |
PHYB |
Green |
On |
Network connection on secondary connector is good |
PHYB |
Green |
Blinking |
Card is attempting to connect to network via secondary connector |
PHYB |
Yellow |
On |
Network connection on secondary connector is broken or self-test failed |
PHYB |
Yellow |
Blinking |
Network topology on secondary connector is invalid |
PHYB |
N/A |
Off |
Card is not receiving power |