Processor	Pentium
Processor Speed	75/90/100/120/133/150/166/180/200MHz
Chip Set	Unidentified
Video Chip Set	Unidentified
Maximum Onboard Memory	256MB (EDO supported)
Maximum Video Memory	Unidentified
Cache	256/512KB
BIOS	Unidentified
Dimensions	305mm x 244mm
I/O Options (CPU)	Floppy drive interface, IDE interface, SCSI interface, parallel port, PS/2 mouse interface, serial ports (2), cache slot
I/O Options (Backplane)	32-bit PCI slots (6), CPU slot
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
IDE interface	CN1	VGA port	CN8
IDE/SCSI interface LED	CN2	PS/2 mouse port	CN9
SCSI interface	CN3	Serial port 1	CN10
Flat panel connector	CN4	AT keyboard connector	CN11
Floppy drive interface	CN5	VGA interface	CN12
Parallel port	CN6	Cache slot	SL1
Serial port 2	CN7

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Shift clock panel select normal	JP3	Pins 1 & 2 closed
	Shift clock panel select inverted	JP3	Pins 2 & 3 closed
»	PS/2 IRQ 12 enabled	JP5	Pins 2 & 3 closed
	Next Step OS used	JP5	Pins 1 & 2 closed
»	LCD bias select negative	JP9	Pins 1 & 2 closed
	LCD bias select positive	JP9	Pins 2 & 3 closed
»	Panel interface voltage select 5v	JP10	Pins 1 & 2 closed
	Panel interface voltage select 3.3v	JP10	Pins 2 & 3 closed
»	Monitor type select color	SW1/1	On
	Monitor type select monochrome	SW1/1	Off
»	Flash BIOS enabled	SW1/2	Off
	Flash BIOS disabled	SW1/2	On
»	CMOS memory normal operation	SW1/3	Off
	CMOS memory clear	SW1/3	On
»	I/O address select 270H	SW1/4	Off
	I/O address select 370H	SW1/4	On

DRAM CONFIGURATION (EDO MEMORY)
Size	Bank 0	Bank 1
8MB	(2) 1M x 32	None
16MB	(2) 2M x 32	None
16MB	(2) 1M x 32	(2) 1M x 32
24MB	(2) 2M x 32	(2) 1M x 32
32MB	(2) 4M x 32	None
32MB	(2) 2M x 32	(2) 2M x 32
40MB	(2) 4M x 32	(2) 1M x 32
48MB	(2) 4M x 32	(2) 2M x 32
64MB	(2) 8M x 32	None
64MB	(2) 4M x 32	(2) 4M x 32
72MB	(2) 8M x 32	(2) 1M x 32
80MB	(2) 8M x 32	(2) 2M x 32
96MB	(2) 8M x 32	(2) 4M x 32
128MB	(2) 8M x 32	(2) 8M x 32

DRAM CONFIGURATION (FPM MEMORY)
Size	Bank 0	Bank 1
8MB	(2) 1M x 36	None
16MB	(2) 2M x 36	None
16MB	(2) 1M x 36	(2) 1M x 36
24MB	(2) 2M x 36	(2) 1M x 36
32MB	(2) 4M x 36	None
32MB	(2) 2M x 36	(2) 2M x 36

DRAM CONFIGURATION (FPM MEMORY CON’T)
Size	Bank 0	Bank 1
40MB	(2) 4M x 36	(2) 1M x 36
48MB	(2) 4M x 36	(2) 2M x 36
64MB	(2) 8M x 36	None
64MB	(2) 4M x 36	(2) 4M x 36
72MB	(2) 8M x 36	(2) 1M x 36
80MB	(2) 8M x 36	(2) 2M x 36
96MB	(2) 8M x 36	(2) 4M x 36
128MB	(2) 8M x 36	(2) 8M x 36
128MB	(2) 16M x 36	None
136MB	(2) 16M x 36	(2) 1M x 36
144MB	(2) 16M x 36	(2) 2M x 36
160MB	(2) 16M x 36	(2) 4M x 36
192MB	(2) 16M x 36	(2) 8M x 36
256MB	(2) 16M x 36	(2) 16M x 36

CACHE CONFIGURATION
Size	SL1
256KB	256KB module installed
512KB	512KB module installed

VIDEO MEMORY CONFIGURATION

Note: The size of the video memory is unidentified.

CPU SPEED SELECTION
CPU speed	Clock speed	Multiplier	JP1	JP2	JP11	JP12
75MHz	50MHz	1.5x	Closed	Closed	N/A	N/A
90MHz	60MHz	1.5x	Closed	Open	N/A	N/A
100MHz	66MHz	1.5x	Open	Closed	Open	Open
120MHz	60MHz	2x	Closed	Open	N/A	N/A
133MHz	66MHz	2x	Open	Closed	Open	Closed
150MHz	60MHz	2.5x	Closed	Open	N/A	N/A
166MHz	66MHz	2.5x	Open	Closed	Closed	Closed
180MHz	60MHz	3x	Closed	Open	N/A	N/A
200MHz	66MHz	3x	Open	Closed	Closed	Open
Note: Pins designated should be in the closed position.

SERIAL PORT 2 SELECTION
Setting		JP4	JP6	JP8
»	RS232	Pins 2 & 3 closed	Pins 2 & 3 closed	Pins 2 & 3 closed
	RS422	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed
	RS485	Pins 1 & 2 closed	Pins 1 & 2 closed	Pins 1 & 2 closed

CONNECTIONS
Purpose	Location	Purpose	Location
Front keyboard connector	JP4	Front panel connector	JP8
Rear keyboard connector	JP5	CPU slot	SL1
CPU interface	JP6

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP1	Unidentified
»	Factory configured - do not alter	JP2	Unidentified
»	Factory configured - do not alter	JP3	Unidentified
»	Factory configured - do not alter (PCI J tag)	JP7	Unidentified