OLIVETTI
M480-10 (BA372)
Processor |
80486SX/80487SX |
Processor Speed |
33MHz |
Chip Set |
Topcat |
Video Chip Set |
Unidentified |
Maximum Onboard Memory |
36MB (16MB on external memory card) |
Maximum Video Memory |
1MB |
Cache |
None |
BIOS |
Unidentified |
Dimensions |
330mm x 218mm |
I/O Options |
Floppy drive interfaces (2), SCSI/IDE interface, parallel port, PS/2 mouse port, serial port, riser slot, feature connector |
NPU Options |
4167 |
CONNECTIONS | |||
Purpose |
Location |
Purpose |
Location |
Feature connector |
CN1 |
Floppy drive interface 3 |
CN6 |
VGA port |
CN2 |
PS/2 mouse port |
CN7 |
Parallel port |
CN3 |
SCSI/IDE interface |
CN8 |
Serial port |
CN4 |
Riser slot |
SL1 |
Floppy drive interface 1/2 |
CN5 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
Third floppy drive interface enabled |
P1 |
Pins 1 & 2 closed |
Third floppy drive interface disabled |
P1 |
Pins 2 & 3 closed | |
» |
Password enabled |
P2 |
Pins 2 & 3 closed |
Password disabled |
P2 |
Pins 1 & 2 closed | |
» |
Parallel port unidirectional |
P3 |
Pins 1 & 2 closed |
Parallel port bidirectional |
P3 |
Pins 2 & 3 closed | |
» |
Interlaced video enabled |
P4 |
Pins 2 & 3 closed |
Interlaced video disabled |
P4 |
Pins 1 & 2 closed | |
» |
Mainboard current control maximum current |
P5 |
Pins 1 & 2 closed |
Mainboard current control minimum current |
P5 |
Pins 2 & 3 closed | |
» |
Hard drive wait state select 1 wait state |
P7 |
Pins 1 & 2 closed |
Hard drive wait state select 0 wait states |
P7 |
Pins 2 & 3 closed | |
» |
On board battery enabled |
P8 |
Pins 2 & 3 closed |
On board battery disabled |
P8 |
Pins 1 & 2 closed | |
» |
Parity check enabled |
P9 |
Pins 1 & 2 closed |
Parity check disabled |
P9 |
Pins 2 & 3 closed |
DRAM CONFIGURATION | |||
Size |
Bank 0 |
Bank 1 |
Bank 2 |
4MB |
4MB |
None |
None |
8MB |
4MB |
(4) 1M x 9 |
None |
12MB |
4MB |
(4) 1M x 9 |
(4) 1M x 9 |
20MB |
4MB |
(4) 4M x 9 |
None |
36MB |
4MB |
(4) 4M x 9 |
(4) 4M x 9 |
Note: Bank 0 is factory installed and is not configurable. Bank 2 is located on the memory card. |
VIDEO MEMORY CONFIGURATION |
Note: 1MB is factory installed and is not configurable. |
CPU TYPE SELECTION | |
Type |
P6 |
80486SX |
Pins 2 & 3 closed |
80487SX |
Pins 1 & 2 closed |