Processor	80286
Processor Speed	12MHz
Chip Set	None
Max. Onboard DRAM	1MB
Cache	None
BIOS	AMI
Dimensions	355mm x 304mm
I/O Options	None
NPU Options	80287

CONNECTIONS
Purpose	Location	Purpose	Location
Front panel display	J1	External battery	J4
Speaker	J2
Note: NPU speed must equal the speed of oscillator Y5 divided by 3. The location of J4 is unidentified.

USER CONFIGURABLE SETTINGS
Function		Jumper/Switch	Position
»	Monitor type select monochrome	SW1/1	Open
	Monitor type select color	SW1/1	Closed
»	Factory configured - do not alter	W1	N/A
»	Expansion bus (8-bit) speed select 6 wait states	W2	pins 5 & 6 closed
»	Expansion bus (8-bit) speed select 5 wait states	W2	pins 3 & 4 closed
	Expansion bus (8-bit) speed select 4 wait states	W2	pins 1 & 2 closed
»	Expansion bus (16-bit) speed select 2 wait states	W3	pins 5 & 6 closed
	Expansion bus (16-bit) speed select 1 wait states	W3	pins 7 & 8 closed
	Expansion bus (16-bit) speed select 3 wait states	W3	pins 3 & 4 closed
	Expansion bus (16-bit) speed select 4 wait states	W3	pins 1 & 2 closed
»	Factory configured - do not alter	W4	N/A
»	Factory configured - do not alter	W5	N/A
»	Factory configured - do not alter	W6	pins 1 & 2 open
»	Factory configured - do not alter	W6	pins 5 & 6 open
»	Factory configured - do not alter	W6	pins 7 & 8 closed
»	Factory configured - do not alter	W7	pins 1 & 2 closed
»	Factory configured - do not alter	W8	pins 1 & 2 closed

DRAM CONFIGURATION
Size	Bank 0	Bank 1
512KB	(18) 4464	NONE
1MB	(18) 4464	(18) 4464
Note:This board uses ZIPs not DIPs.

DRAM JUMPER CONFIGURATION
Size	W6
512KB	pins 3 & 4 closed
1MB	pins 3 & 4 open