Processor	Motorola 68030
Processor Speed	Unidentified
Chip Set	Unidentified
Video Chip Set	None
Maximum Onboard Memory	32MB
Maximum Video Memory	None
Cache	None
BIOS	Unidentified
Dimensions	330mm x 218mm
I/O Options	Floppy drive interface, IDE interface, SCSI interface, parallel port, serial ports (8), I/O expansion slot
NPU Options	None

CONNECTIONS
Purpose	Location	Purpose	Location
IDE interface	CN1	Front panel connector	J10
SCSI interface	CN2	Reset switch	W3
Serial ports 0 – 3	CN3	Power LED	W8
Serial ports 4 – 7	CN4	Run LED	W9
Floppy drive interface (AM-219)	CN5	Disk LED	W12
Parallel port	J1	I/O expansion slot	SL1

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Factory configured - do not alter	JP3	Closed
»	Factory configured - do not alter	JP4	Closed
»	Remote reset disabled	W2	Open
	Remote reset enabled	W2	Closed
»	Factory configured - do not alter	W4	Closed
»	Factory configured - do not alter	W5	Closed
»	Factory configured - do not alter	W8	Open
»	Factory configured - do not alter	W9	Open
»	Factory configured - do not alter	W12	Open
»	Factory configured - do not alter	W13	Open
»	Factory configured - do not alter	W14	Open

DRAM CONFIGURATION
Size	Bank 0
4MB	(1) 1M x 36
8MB	(1) 2M x 36
16MB	(1) 4M x 36
32MB	(1) 8M x 36

DRAM JUMPER CONFIGURATION
Size	JP1	JP2
4MB	Closed	Closed
8MB	Open	Closed
16MB	Closed	Open
32MB	Open	Open

TERMINATION SELECTION
Setting	W6
Termination enabled	Pins 2 & 3 closed
Termination disabled	Pins 1 & 2 closed

MAIN BOOT SELECTION
Setting		SW1/1	SW1/2
	Floppy drive	On	On
»	SCSI	Off	On

ALTERNATE BOOT SELECTION
Setting	SW1/3	SW1/4
None	On	On
Floppy drive	Off	On
Steaming tape	Off	Off