Category	Digital to analog signal converter
Chipset Controller	Unidentified
I /O Options Supported	Digital signal input via module connector
Maximum Onboard Memory	N/A

CONNECTIONS
Purpose	Location	Purpose	Location
Output connector	H1	Potentiometer: channel 0 gain adjust	P2
Expansion card connector	H2	Potentiometer: channel 1 offset adjust	P3
Potentiometer: channel 0 offset adjust	P1	Potentiometer: channel 2 gain adjust	P4

CHANNEL 0 OUTPUT SIGNAL
» Setting		J1
»	Bipolar/-5 to 5V	Pins 2 & 9, 5 & 6 closed
»	Bipolar/-2.5 to 2.5V	Pins 2 & 9, 3 & 8, 5 & 6 closed
»	Bipolar/10V	Pins 3 & 4, 2 & 9 closed
»	Unipolar/0 to 5V	Pins 1 & 10, 3 & 8, 5 & 6 closed
»	Unipolar/0 to 10V	Pins 5 & 6, 1 & 10 closed

CHANNEL 1 OUTPUT SIGNAL
» Setting		J2
»	Bipolar/-5 to 5V	Pins 2 & 9, 5 & 6 closed
»	Bipolar/-2.5 to 2.5V	Pins 2 & 9, 3 & 8, 5 & 6 closed
»	Bipolar/10V	Pins 3 & 4, 2 & 9 closed
»	Unipolar/0 to 5V	Pins 1 & 10, 3 & 8, 5 & 6 closed
»	Unipolar/0 to 10V	Pins 5 & 6, 1 & 10 closed

FACTORY CONFIGURED SETTINGS
Jumper	Setting
J3	N/A

MISCELLANEOUS TECHNICAL NOTES

The DM12-10 is a modular daughter-card designed to work with the Quatech PXB-721 or MXI-241. Channel 0 output is taken from pins 1, 2, or 3 of header H1. Channel 1 output is taken from pins 5, 6, or 7 of header H1. The rest of the pins of header H1 are grounded.