HwMuseum | Index

QUATECH, INC.

DMM-100

Card Type

Digital multi-meter adapter

Chipset/Controller

Unidentified

I/O Options

Voltage, current, resistance and diode/continuity inputs

Maximum DRAM

N/A

CONNECTIONS

Purpose

Location

Purpose

Location

400mA range current test lead input

CN1

Ohmmeter test lead input

CN4

4A range current test lead input

CN2

5-amp fuse

F1

Common lead connector

CN3

5-amp fuse

F2

INTERRUPT SELECT

IRQ

J1

»

Disabled

All Pins open

 

IRQ2

Pins 1 & 2 closed

 

IRQ3

Pins 3 & 4 closed

 

IRQ4

Pins 5 & 6 closed

 

IRQ5

Pins 7 & 8 closed

 

IRQ6

Pins 9 & 10 closed

 

IRQ7

Pins 11 & 12 closed

 

IRQ10

Pins 13 & 14 closed

 

IRQ11

Pins 15 & 16 closed

 

IRQ12

Pins 17 & 18 closed

 

IRQ14

Pins 19 & 20 closed

 

IRQ15

Pins 21 & 22 closed

I/O ADDRESS CONFIGURATION

Address

SW1

SW2

»

300h

1, 2, 3, 4, 5 & 6 on

1, 2, 3, 4, 5 & 6 on

 

240h

1, 2, 3, 4, 5, 6 & 8 on

1, 3, 4, 5 & 6 on

 

6FC4h

1 & 4 on

3, 4 & 5 on

Note: The address range for the DMM-100 is from 0 to FFFFh. The switches are a binary representation of the addresses. The switches have the following decimal values: SW1/1=8, SW1/2=4, SW1/3=2, SW1/4=1, SW1/5=8, SW1/6=4, SW1/7=2, SW1/8=1, SW2/1=8, SW2/2=4, SW2/3=2, SW2/4=1, SW2/5=8, SW2/6=4. The DMM-100 requires four consecutive address locations.