CARRY COMPUTER ENGINEERING CO., LTD.
PCD-XX-211
|
Card Type |
PCMCIA slot controller |
|
Chip Set |
Unidentified |
|
Maximum Onboard Memory |
N/A |
|
I/O Options |
PCMCIA interface |
|
Data Bus |
16-bit ISA |
|
Floppy drives supported |
None |
|
CONNECTIONS |
||||||
|
Function |
Label |
Function |
Label |
|||
|
50-pin interface connector to drive unit |
CN1 |
PCMCIA Slot |
JP5 |
|||
|
26-pin interface connector to drive unit |
CN2 |
|
|
|||
|
Note: Both interface connectors are proprietary and are used with PCMCIA drive unit. |
||||||
|
MULTI-CARD CONFIGURATION |
||||
|
Setting |
Controller Slot # |
Drive Slot # |
JP3 |
JP4 |
|
í Card is first in system |
1 |
0 |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
Card is second in system |
3 |
2 |
Pins 2 & 3 closed |
Pins 1 & 2 closed |
|
Card is third in system |
5 |
4 |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
|
Card is fourth in system |
7 |
6 |
Pins 1 & 2 closed |
Pins 1 & 2 closed |
|
MISCELLANEOUS TECHNICAL NOTES |
Note : The PCD-XX-211 slot controller is a controller card for a PCMCIA drive which has one slot and mounts in a standard floppy bay. Multiple PCD-XX-211 controller cards may be installed in a system. JP3 & JP4 must be reset to designate a unique number for each controller and drive slot. |