DIAMOND FLOWER, INC.
WG-9000VL
|
Category |
Video |
|
Video Types Supported |
XVGA |
|
Video Processor |
Weitek 9000 |
|
Highest Resolution Supported |
1280 x 1024 |
|
Data Bus Type |
32-bit VESA Local Bus |
|
Memory Type |
VRAM |
|
Maximum Onboard Memory |
2048KB |
|
CONNECTIONS | |||
|
Purpose |
Location |
Purpose |
Location |
|
15 pin analog video port |
C1 |
VESA Feature connector |
J1 |
|
BIOS MEMORY CONFIGURATION | |||
|
Address |
JP1/A |
JP1/B | |
| » |
C000h |
Closed |
Closed |
|
D000h |
Closed |
Open | |
|
E000h |
Open |
Closed | |
|
F000h |
Open |
Open | |
|
Note: If VGA card is used in a system with a Weitek 4167 or 3167 math co-processor installed, memory location C000h cannot be selected. | |||
|
DISPLAY MEMORY FRAME BUFFER | |||
|
Address Width |
JP1/C |
JP1/G | |
| » |
16-bit memory access |
Open |
Closed |
|
8-bit memory access |
Closed |
Open | |
|
VIDEO INTERRUPT SELECTION | ||
|
IRQ 2/9 |
JP1/D | |
| » |
Disabled |
Open |
|
Enabled |
Closed | |
|
WAIT STATE SELECTION | ||
|
Zero Wait State |
JP1/E | |
| » |
Disabled |
Open |
|
Enabled |
Closed | |
|
BIOS ROM ACCESS CONFIGURATION | ||
|
Address Width |
JP1/F | |
| » |
16-bit BIOS ROM access |
Open |
|
8-bit BIOS ROM access |
Closed | |
|
SECONDARY VGA CARD CONFIGURATON | ||
|
Secondary VGA Card |
JP3 |
JP4 |
|
Absent |
Closed |
Open |
|
Installed |
Open |
Closed |
|
MISCELLANEOUS TECHNICAL NOTE |
|
Note:In order to configure resolution and scan rates, the utility software included with the card must be run. |