ULTRASTOR
ULTRAARRAY-144EZ
|
| |
|
Data bus: |
N/A |
|
Size: |
5.25" FF, HH |
|
Hard drive supported: |
5 SCSI channels |
|
Floppy drives supported: |
None |
|
DIAGNOSTIC LED(S) | ||
|
LED |
Status |
Function |
|
1 |
on |
a command is being processed by the controller |
|
1 |
off |
no command is being processed by the controller |
|
2 |
on |
indicates a drive failure |
|
2 |
off |
drive is good |
|
3 |
on |
maintenance process is active |
|
3 |
off |
maintenance process is not active |
|
4 |
on |
status update |
|
4 |
off |
no status update |
|
USER CONFIGURABLE SETTINGS | ||
|
Function |
Location |
Setting |
|
Active termination for drive channel 0 enabled |
JP1/pins 1 & 2 |
closed |
|
Active termination for drive channel 1 enabled |
JP1/pins 3 & 4 |
closed |
|
Active termination for drive channel 2 enabled |
JP1/pins 5 & 6 |
closed |
|
Active termination for drive channel 3 enabled |
JP1/pins 7 & 8 |
closed |
|
Active termination for drive channel 4 enabled |
JP1/pins 9 & 10 |
closed |
|
Active termination for drive channel 0 enabled |
JP1/pins 11 & 12 |
closed |
|
TERMINATION POWER - JP7 | |||
|
Setting |
JP7/pins 1 & 2 |
JP7/pins 3 & 4 | |
| » |
TERMPWR supplied by UltraArray-144EZ to itself |
closed |
open |
|
TERMPWR supplied by UltraArray-144EZ to TRMPWR pin |
closed |
closed | |
|
TERMPWR supplied by TRMPWR pin |
open |
closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
JP1 & JP7 are located on the PCB at the bottom of the drive. Diagram is not available. |