STB SYSTEMS, INC.
GRAPHIX PLUS II
|
Card Type |
Multi-I/O |
|
Video Processor |
6845 |
|
Maximum Onboard Memory |
32KB DRAM |
|
I/O Options |
SASI/SCSI connector, clock/calendar, light pen port, parallel port, video port (3), RF modulator connector |
|
Data Bus |
8-bit ISA |
|
Video Types Supported |
Monochrome/CGA |
|
Highest Resolution Supported |
640 x 350 |
|
Hard Drives Supported |
Up to 7 SASI or SCSI devices |
|
CONNECTIONS | |||
|
Function |
Label |
Function |
Label |
|
Parallel or SASI/SCSI port |
J1 |
Light pen port |
J5 |
|
Test connector |
J2 |
CGA video out |
J6 |
|
1.5V AA battery connector |
J3 |
Composite video out |
J7 |
|
RF modulator connector |
J4 |
Monochrome video out |
J8 |
|
USER CONFIGURABLE SETTINGS | |||
|
Setting |
Label |
Position | |
| » |
J1 is a parallel port |
SW1/1 |
Off |
|
J1 is a SASI/SCSI port |
SW1/1 |
On | |
| » |
Automatically detect the adapter type being used by software |
SW1/4 |
On |
|
Send all video signals to the monochrome monitor |
SW1/4 |
Off | |
| » |
Monochrome video disabled when monochrome monitor is off or not connected |
SW1/5 |
On |
|
Monochrome video enabled even when no monitor is available |
SW1/5 |
Off | |
| » |
Red signal sent to monochrome display |
SW1/6 |
On |
|
Red not signal sent to monochrome display |
SW1/6 |
Off | |
| » |
Green signal sent to monochrome display |
SW1/7 |
On |
|
Green not signal sent to monochrome display |
SW1/7 |
Off | |
| » |
Blue signal sent to monochrome display |
SW1/8 |
On |
|
Blue not signal sent to monochrome display |
SW1/8 |
Off | |
|
MONITOR TYPE SELECTION | |||
|
Setting |
SW1/2 |
SW1/3 | |
| » |
Card acts as both monochrome and color displays |
Off |
Off |
|
Card acts as monochrome display only |
Off |
On | |
|
Card acts as color display only |
On |
Off | |
|
Card behaves like Graphix Plus card in monochrome graphics mode |
On |
On | |