TYAN COMPUTER CORPORATION
S1363-004 (Rev. 1.0)
|
| |
|
Data bus: |
32-bit PCI |
|
Size: |
Half-length, Full-height card |
|
Hard drive supported: |
Four Enhanced IDE (AT) interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
25-pin parallel port - external |
CN1 |
|
9-pin serial port - external |
CN2 |
|
10-pin serial port - internal |
CN3 |
|
16-pin game port - internal |
CN4 |
|
34-pin primary control cable connector - floppy drive |
CN5 |
|
40-pin primary IDE (AT) interface connector |
CN6 |
|
40-pin secondary IDE (AT) interface connector |
CN7 |
|
4-pin connector - drive active LED |
CN8 |
|
40-pin connector - paddle card |
PDL1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive disk change signal not intercepted |
J0 |
open |
|
Floppy drive disk change being intercepted |
J0 |
closed | |
| » |
Fixed I/O address |
J1 |
closed |
|
Relocatable I/O address |
J1 |
open | |
| » |
Secondary IDE (AT) channel IRQ to ISA IRQ15 |
J4 |
closed |
|
No secondary IDE (AT) channel IRQ to ISA IRQ15 |
J4 |
open | |
| » |
Primary IDE (AT) channel legacy IRQ to ISA IRQ14 |
J5 |
closed |
|
No primary IDE (AT) channel legacy IRQ to ISA IRQ 14 |
J5 |
open | |
| » |
No buffered secondary IDE (AT) legacy IRQ to IRQ15 |
J6 |
open |
|
Buffered secondary IDE (AT) legacy IRQ to IRQ15 |
J6 |
closed | |
| » |
No buffered primary IDE (AT) legacy IRQ to IRQ14 |
J7 |
open |
|
Buffered primary IDE (AT) legacy IRQ to IRQ14 |
J7 |
closed | |
| » |
Factory configured - do not alter |
J8 |
N/A |
| » |
Factory configured - do not alter |
J9 |
N/A |
| » |
Factory configured - do not alter |
J10 |
N/A |
| » |
Native mode IDE (AT) IRQ not used |
J11 |
open |
|
Native mode IDE (AT) IRQ’s to PCI INTA |
J11 |
closed | |
| » |
Factory configured - do not alter |
J90 |
N/A |
| » |
Floppy drive order A:, B: normal |
P1/pins 2 & 3 |
closed |
|
Floppy drive order A:, B: exchange |
P1/pins 1 & 2 |
closed | |
| » |
Floppy controller I/O address is 3F0h |
P2/pins 2 & 3 |
closed |
|
Floppy controller I/O address is 370h |
P2/pins 1 & 2 |
closed | |
| » |
Floppy controller enabled |
P3/pins 2 & 3 |
closed |
|
Floppy controller disabled |
P3/pins 1 & 2 |
closed | |
| » |
Factory configured - do not alter |
P10 |
N/A |
| » |
Factory configured - do not alter |
P11 |
N/A |
| » |
Factory configured - do not alter |
T1 |
N/A |
| » |
IRQ4 for serial port 1 |
T4 |
closed |
|
No interrupt for serial port 1 |
T4 |
open | |
| » |
IRQ3 for serial port 2 |
T5 |
closed |
|
No interrupt for serial port 2 |
T5 |
open | |
| » |
ISA (AT) uni-directional printer port mode |
T6 |
open |
|
PS2 bi-directional compatible mode |
T6 |
closed | |
| » |
Game port enabled |
T7 |
closed |
|
Game port disabled |
T7 |
open | |
|
USER CONFIGURABLE SETTINGS (CON’T) | |||
|
Function |
Location |
Setting | |
| » |
Factory configured - do not alter |
T8 |
N/A |
| » |
Factory configured - do not alter |
T9 |
N/A |
| » |
Factory configured - do not alter |
T10 |
N/A |
| » |
Factory configured - do not alter |
T11 |
N/A |
|
ACCESS IDE (AT) CHANNELS I/O ADDRESS CONFIGURATION | |||
|
Setting |
J2 |
J3 | |
| » |
Enabled |
open |
closed |
|
Disabled |
closed |
open | |
|
PARALLEL PORT CONFIGURATION | |||
|
Port |
P8 |
P9 | |
| » |
1 (378h - 37Fh) |
pins 2 & 3 closed |
pins 2 & 3 closed |
|
2 (278h - 27Fh) |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
3 (3BCh - 3BEh) |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
Disabled |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
SERIAL PORT 1 CONFIGURATION | |||
|
COM |
P4 |
P5 | |
| » |
COM1 (3F8h) |
pins 2 & 3 closed |
pins 2 & 3 closed |
|
COM3 (3E8h) |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
COM4 (2E8h) |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
Disabled |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
SERIAL PORT 2 CONFIGURATION | |||
|
COM |
P6 |
P7 | |
| » |
COM2 (2F8h) |
pins 2 & 3 closed |
pins 2 & 3 closed |
|
COM3 (3E8h) |
pins 2 & 3 closed |
pins 1 & 2 closed | |
|
COM4 (2E8h) |
pins 1 & 2 closed |
pins 1 & 2 closed | |
|
Disabled |
pins 1 & 2 closed |
pins 2 & 3 closed | |
|
PARALLEL PORT INTERRUPT SELECTION | |||
|
IRQ |
T2 |
T3 | |
| » |
7 |
closed |
open |
|
5 |
open |
closed | |
|
Disabled |
open |
open | |
|
SERIAL PORTS ADVANCED INTERRUPT CONFIGURATION | |||||
|
Port 1 |
Port 2 |
T3 |
T4 |
T5 | |
| » |
IRQ4 |
IRQ3 |
open |
closed |
closed |
|
IRQ3 |
IRQ4 |
open |
pin 1 to T5/pin 1 |
pin 2 to T4/pin 2 | |
|
IRQ5 |
IRQ3 |
open |
pin 1 to T5/pin 1 |
pin 1 to T4/pin 1 | |
|
IRQ4 |
IRQ5 |
pin 2 to T4/pin 2 |
pin 2 to T3/pin 2 |
closed | |
|
IRQ4 |
Disabled IRQ3 |
open |
closed |
open | |
|
Disabled IRQ4 |
IRQ3 |
open |
open |
closed | |
|
Disabled IRQ3 |
IRQ4 |
open |
pin 2 to T5/pin 2 |
pin2 to T4/pin 2 | |
|
Disabled IRQ4 |
IRQ5 |
pin 2 to T4/pin 2 |
pin 2 to T3/pin 2 |
open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Note: In order to utilize the S1366’s IDE and I/O functions, the S136x paddle card must be installed on connector PDL1. |