MODULAR CIRCUIT TECHNOLOGY
MCT-VIO+
|
| |
|
Data bus: |
32-bit VL-bus |
|
Size: |
Three-quarter length, half-height card |
|
Hard drive supported: |
Four IDE(AT) drives |
|
Floppy drives supported: |
Four 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector - primary floppy drive |
CN1 |
|
25-pin parallel port - external |
CN2 |
|
40-pin IDE(AT) Interface connector - primary drive |
CN3 |
|
4-pin connector - primary IDE drive active LED |
CN4 |
|
10-pin serial port 2 - internal |
CN5 |
|
9-pin serial port 1 - external/10-pin serial port 1 internal |
CN6 |
|
40-pin IDE (AT) Interface connector - secondary drive |
CN7 |
|
4-pin connector - secondary drive active LED |
CN8 |
|
34-pin control cable connector - secondary floppy drive |
CN9 |
|
16-pin game port - internal |
CN10 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
IOCHRDY signal disabled |
J7 |
Open |
|
IOCHRDY signal enabled |
J7 |
Closed | |
| » |
Floppy drive enable |
J8 |
Pins 2 & 3 closed |
|
Floppy drive disable |
J8 |
Pins 1 & 2 closed | |
| » |
Floppy drive normal compatible mode enabled |
J16 |
Pins 2 & 3 closed |
|
Floppy drive enhanced mode enabled |
J16 |
Pins 1 & 2 closed | |
| » |
IDE(AT) interface enabled |
J17 |
Pins 2 & 3 closed |
|
IDE(AT) interface disabled |
J17 |
Pins 1 & 2 closed | |
| » |
Floppy drive I/O address is 3F0h |
J26 |
Pins 2 & 3 closed |
|
Floppy drive I/O address is 370h |
J26 |
pins 1 & 2 closed | |
| » |
Game port enable |
J37 |
Closed |
|
Game port disable |
J37 |
Open | |
|
IDE CHANNEL AND ADDRESS CONFIGURATION | |||
|
Setting |
J18 |
J19 | |
|
Primary and secondary channels enabled |
Pins 1 & 2 closed |
Pins 2 & 3 closed | |
|
Primary channel only enabled (170h) |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
| » |
Primary channel only enabled (1F0h) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
IDE WAIT STATE FOR VL-BUS CLOCK | ||||
|
Setting |
J20 |
J21 |
J22 | |
| » |
General setting for all VL bus clocks |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
<= 33 MHz VL bus clock |
Pins 1 & 2 closed |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
|
> 33 MHz VL bus clock |
Pins 2 & 3 closed |
Pins 1 & 2 closed |
Pins 2 & 3 closed | |
|
FLOPPY CHANNEL CONFIGURATION | ||||
|
Setting |
J4 |
J5 |
J6 | |
|
Primary and secondary channels enabled |
Closed |
Closed |
Closed | |
| » |
Primary channel enabled |
Open |
Open |
Open |
|
Note: The primary and secondary option is invalid with ECP mode. | ||||
|
PARALLEL PORT CONFIGURATION | |||
|
LPT |
J9 |
J27 | |
| » |
LPT1 (378h) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
LPT2 (278h) |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
|
LPT3 (3BCh) |
Pins 1 & 2 closed |
Pins 1 & 2 closed | |
|
Disabled |
Pins 1 & 2 closed |
Pins 2 & 3 closed | |
|
SERIAL PORT 1 CONFIGURATION | |||
|
COM |
J10 |
J11 | |
| » |
COM1 (3F8h) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
COM2 (2F8h) |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
|
COM3 (3E8h) |
Pins 1 & 2 closed |
Pins 2 & 3 closed | |
|
Disabled |
Pins 1 & 2 closed |
Pins 1 & 2 closed | |
|
SERIAL PORT 2 CONFIGURATION | |||
|
COM |
J12 |
J13 | |
| » |
COM2 (2F8h) |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
COM1 (3F8h) |
Pins 1 & 2 closed |
Pins 2 & 3 closed | |
|
COM4 (2E8h) |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
|
Disable |
Pins 1 & 2 closed |
Pins 1 & 2 closed | |
|
PARALLEL PORT MODE CONFIGURATION | |||
|
Mode |
J28 |
J29 | |
| » |
Printer |
Pins 2 & 3 closed |
Pins 2 & 3 closed |
|
EPP & Printer |
Pins 1 & 2 closed |
Pins 2 & 3 closed | |
|
ECP |
Pins 2 & 3 closed |
Pins 1 & 2 closed | |
|
EPP & ECP |
Pins 1 & 2 closed |
Pins 1 & 2 closed | |
|
ECP DMA SELECTION | |||||
|
Channel |
J38 |
J39 |
J40 |
J41 |
J42 |
|
DMA 1 |
Closed |
Open |
Open |
Closed |
Closed |
|
DMA 3 |
Closed |
Closed |
Closed |
Open |
Open |
|
Disabled |
Open |
Open |
Open |
Open |
Open |
|
SERIAL PORT INTERRUPT SELECTION | ||||||
|
Serial Port 1 |
Serial Port 2 |
J32 |
J33 |
J34 |
J35 | |
|
No Interrupt |
No Interrupt |
Open |
Open |
Open |
Open | |
|
No Interrupt |
IRQ 3 |
Open |
Closed |
Open |
Open | |
|
No Interrupt |
IRQ 4 |
Open |
J33/pin 1 to J34/pin 1 |
Open | ||
|
No Interrupt |
IRQ 5 |
J32/pin 1 to J33/pin 1 |
Open |
Open | ||
|
IRQ 3 |
No Interrupt |
Open |
J33/pin 2 to J34/pin 2 |
Open | ||
| » |
IRQ3 |
IRQ 4 |
Open |
J33/pin 1 to J34/pin 1 J33/pin 2 to J34/pin 2 |
Open | |
|
IRQ3 |
IRQ5 |
J32/pin 1 to J33/pin1 J33/pin 2 to J34/pin 2 |
Open | |||
|
IRQ4 |
No Interrupt |
Open |
Open |
Closed |
Open | |
|
IRQ4 |
IRQ3 |
Open |
Closed |
Closed |
Open | |
|
IRQ4 |
IRQ5 |
J32/pin 1 to J33/pin 1 |
Closed |
Open | ||
|
IRQ5 |
No Interrupt |
Open |
Open |
J34/pin 2 to J35/pin 2 | ||
|
IRQ5 |
IRQ3 |
Open |
Closed |
J34/pin 2 to J35/pin 2 | ||
|
IRQ5 |
IRQ4 |
Open |
J33/pin 1 to J34/pin 1 J34/pin 2 to P35/pin 2 | |||
|
PARALLEL PORT INTERRUPT SELECTION | |||
|
IRQ |
J35 |
J36 | |
|
IRQ5 |
Closed |
Open | |
| » |
IRQ7 |
Open |
Closed |
|
No Interrupt |
Open |
Open | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
Jumper J35 serves multiple functions so it appears in both serial port and parallel port interrupt selection tables. |