LONGSHINE MICROSYSTEM, INC.
LCS-6620
|
Data Bus |
16-bit ISA |
|
Card Size |
Full-length, full-height card |
|
Hard Drives supported |
Two ST-506/412(MFM) drives |
|
Floppy drives supported |
Two 360KB, 720KB, 1.2MB |
|
CONNECTIONS | |||
|
Function |
Location |
Function |
Location |
|
34-pin cable connector - floppy drive |
J1 |
34-pin cable connector - hard drive |
J5 |
|
20-pin data cable connector - drive 0/1 |
J3 |
4-pin connector - drive active LED |
J6 |
|
20-pin data cable connector - drive 0/1 |
J4 | ||
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Label |
Position | |
| » |
IDE primary address selection |
JP1 |
Pins 2 & 3 closed |
|
IDE secondary address selection |
JP1 |
Pins 1 & 2 closed | |
| » |
Floppy drive primary address selection |
JP2 |
Pins 2 & 3 closed |
|
Floppy drive secondary address selection |
JP2 |
Pins 1 & 2 closed | |
|
200 step selection enabled |
JP3 |
Closed | |
|
17.6 step selection enabled |
JP3 |
Open | |
| » |
Factory configured - do not alter |
JP5 |
Unidentified |
| » |
Factory configured - do not alter |
JP6 |
Unidentified |