INTELLIGENT COMPUTER PERIPHERALS
GDT6120, GDT6520
Maximum Onboard Memory |
32MB |
Data Bus |
32-bit PCI |
Card Size |
Full-height, three-quarter-length card |
Hard Drives Supported |
Up to 14 SCSI devices |
Floppy Drives Supported |
None |
RAID Levels Supported |
RAID 0, 1, levels 4 and 5 on GDT6520 only |
CONNECTIONS | |||
Function |
Label |
Function |
Label |
50-pin SCSI connector - external, channel A |
J1 |
50-pin SCSI connector - internal, channel B |
J4 |
50-pin SCSI connector - internal, channel A |
J2 |
RAID GAL |
U1 |
Drive active LEDs - see pinout below |
J3 |
J3 PINOUT | |||
Function |
Pin |
Function |
Pin |
Channel A common |
1 |
Channel B common |
3 |
Channel A active |
2 |
Channel B active |
4 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
Active termination power enabled for channel A |
TA |
Closed |
Active termination power disabled for channel A |
TA |
Open | |
» |
Active termination power enabled for channel B |
TB |
Closed |
Active termination power disabled for channel B |
TB |
Open |
DRAM CONFIGURATION | |
Size |
Bank 0 |
4MB |
(1) 1M x 32 |
8MB |
(1) 2M x 32 |
16MB |
(1) 4M x 32 |
32MB |
(1) 8M x 32 |
DIAGNOSTIC LED(S) | |||
LED |
Color |
Status |
Condition |
A |
Yellow |
On |
SCSI channel A is active |
A |
Yellow |
Off |
SCSI channel A is not active |
B |
Yellow |
On |
SCSI channel B is active |
B |
Yellow |
Off |
SCSI channel B is not active |
T |
Green |
On |
Direct memory access is in progress |
T |
Green |
Off |
Direct memory access is not in progress |
S |
Green |
On |
Card is operating normally |
S |
Green |
Off |
An error has occurred |