INI-9100UW

HwMuseum | Index
INITIO CORPORATION

INI-9100UW

Data Bus

32-bit PCI

Card Size

Quarter-length, full-height card

Hard Drives supported

Up to 15 SCSI devices

Floppy drives supported

None

CONNECTIONS

Function

Location

Function

Location

50-pin SCSI connector - internal

J1

4-pin connector - drive active LED

J3

50-pin SCSI connector - external

J2

68-pin SCSI connector - internal

J4

USER CONFIGURABLE SETTINGS

Function

Label

Position

»
Host adapter is only one in system

JP1

Open

Host adapter shares SCSI bus with adapter in another computer

JP1

Closed

Note: Closing jumper JP1 sets active termination so it is always on. The setting is used when the adapter shares the SCSI bus with an adapter in another computer. If this computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.

Data Bus	32-bit PCI
Card Size	Quarter-length, full-height card
Hard Drives supported	Up to 15 SCSI devices
Floppy drives supported	None

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - internal	J1	4-pin connector - drive active LED	J3
50-pin SCSI connector - external	J2	68-pin SCSI connector - internal	J4

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Host adapter is only one in system	JP1	Open
	Host adapter shares SCSI bus with adapter in another computer	JP1	Closed
Note: Closing jumper JP1 sets active termination so it is always on. The setting is used when the adapter shares the SCSI bus with an adapter in another computer. If this computer can be turned off, closing the jumper will insure that active on-board termination is on all the time, regardless of whether power is applied or not.