KIMPSION INTERNATIONAL
IDE3 - AT BUS/FLOPPY DISK CONTROLLER
|
Data bus: |
16-bit, ISA |
|
Size: |
Half-length, full-height card |
|
Hard drive supported: |
Two IDE (AT) Interface drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, or 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
40-pin AT Interface (IDE) connector |
J1 |
|
34-pin control cable connector-floppy drive |
J4 |
|
4-pin connector-Drive active LED |
J6 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Hard drive Interrupt is IRQ14 |
JP2 |
Pins 2 & 3 closed |
|
Hard drive Interrupt is disabled |
JP2 |
Pins 1 & 2 closed | |
| » |
1.2MB floppy drive support enabled |
JP3 |
Pins 2 & 3 closed |
|
360KB floppy drive support enabled |
JP3 |
Pins 1 & 2 closed | |
| » |
Floppy drive enabled |
JP7 |
Pins 2 & 3 closed |
|
Floppy drive disabled |
JP7 |
Pins 1 & 2 closed | |
| » |
Hard drive enabled |
JP8 |
Pins 1 & 2 closed |
|
Hard drive disabled |
JP8 |
Pins 2 & 3 closed | |