LONGSHINE MICROSYSTEM, INC.
LCS-6610HX Rev. 2
|
|
Data bus: 16-bit, ISA
Size: Half-length, full-height card
Hard drives supported: Two MFM ST506/412 drives
Floppy drives supported: None
Max. Heads and Cyls.: 16 Heads and 1024 Cyls.
|
CONNECTIONS | |
|
Function |
Location |
|
4-pin connector-drive active LED |
CN1 |
|
20-pin data cable connector-drive 0 |
CN2 |
|
20-pin data cable connector-drive 1 |
CN3 |
|
34-pin control cable connector-hard drive |
CN4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Hard drive port address is 1F0-1F7h |
JP4 |
open |
|
Hard drive port address is 170-177h |
JP4 |
closed | |
| » |
BIOS other than DTK on host |
JP5 |
closed |
|
DTK BIOS on host |
JP5 |
open | |
| » |
LCS-6610HX is not grounded to host |
JP7 |
open |
|
LCS-6610HX is grounded to host |
JP7 |
closed | |
|
Note:Jumper JP1, JP3, and JP8 are reserved and must be left "open."JP9 is reserved and must be left pins 1 & 2 "closed."This controller contains no on-board software. | |||