HEWLETT-PACKARD COMPANY
D1682A
|
| |
|
Data bus: |
16-bit ISA |
|
Size: |
Three-quarter length, full-height card |
|
Hard drive supported: |
Up to seven SCSI devices |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
SCSI connector - internal |
J2 |
|
4-pin connector-drive active LED |
J3 |
|
SCSI connector - external |
J4 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Synchronous negotiation enabled |
J5/1 |
closed |
|
Synchronous negotiation disabled |
J5/1 |
open | |
| » |
BIOS enabled |
J6/1 |
closed |
|
BIOS disabled |
J6/1 |
open | |
|
DMA SELECTION | |||
|
Channel |
J5/8 |
J9/2 |
J9/6 |
|
5 |
closed |
closed |
closed |
|
Note: No other settings were provided by manufacturer. | |||
|
I/O PORT ADDRESS SELECTION | ||||
|
Address |
J7/2 |
J7/3 |
J7/4 | |
| » |
330h |
closed |
open |
open |
|
130h |
closed |
open |
closed | |
|
134h |
open |
open |
closed | |
|
230h |
closed |
closed |
open | |
|
234h |
open |
closed |
open | |
|
334h |
open |
open |
open | |
|
I/O PORT INTERRUPT SELECTION | ||||
|
IRQ |
J5/9 |
J5/10 |
J5/11 | |
| » |
IRQ11 |
open |
closed |
open |
|
IRQ9 |
open |
open |
open | |
|
IRQ10 |
closed |
open |
open | |
|
IRQ12 |
closed |
closed |
open | |
|
IRQ14 |
open |
open |
closed | |
|
IRQ15 |
closed |
open |
closed | |
|
I/O PORT INTERRUPT SELECTION (CONTINUED) | |||||||
|
IRQ |
J9/9 |
J9/10 |
J9/11 |
J9/12 |
J9/13 |
J9/14 | |
| » |
IRQ11 |
open |
open |
closed |
open |
open |
open |
|
IRQ9 |
closed |
open |
open |
open |
open |
open | |
|
IRQ10 |
open |
closed |
open |
open |
open |
open | |
|
IRQ12 |
open |
open |
open |
closed |
open |
open | |
|
IRQ14 |
open |
open |
open |
open |
closed |
open | |
|
IRQ15 |
open |
open |
open |
open |
open |
closed | |
|
MISCELLANEOUS TECHNICAL NOTES |
|
The only ISA SCSI Host Adapter address supported by Hewlett Packard is device address 7. Jumpers not specified in this document are factory configured. |