DTK COMPUTER, INC.
PTI-213
|
| |
|
Data bus: |
16-bit ISA |
|
Size: |
Three/quarter-length, full-height card |
|
Hard drive supported: |
Two MFM ST506/412 drives |
|
Floppy drives supported: |
Two 360KB, 720KB, 1.2MB, 1.44MB drives |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin connector - floppy drive interface |
J1 |
|
34-pin control cable connector - hard drive |
J2 |
|
20-pin data cable connector - drive 0 |
J3 |
|
20-pin data cable connector - drive 1 |
J4 |
|
6-pin connector - drive active LED |
JP1 |
|
USER CONFIGURABLE SETTINGS | |||
|
Function |
Location |
Setting | |
| » |
Floppy drive type AT select |
JP4 |
pins 1 & 2 closed |
|
Floppy drive type PS/2 select |
JP4 |
pins 1 & 2 closed | |
| » |
PTI-213 is primary hard drive adapter in system (170 - 177h) |
JP2 |
pins 2 & 4 closed |
|
PTI-213 is secondary hard drive adapter in system (1F0 - 1F7h) |
JP2 |
pins 4 & 6 closed | |
| » |
PTI-213 is primary floppy drive adapter in system (390 - 37Fh) |
JP2 |
pins 1 & 3 closed |
|
PTI-213 is secondary floppy drive adapter in system (3F0 - 3F7h) |
JP2 |
pins 3 & 5 closed | |
|
FLOPPY DRIVE CONFIGURATION | |||
|
Setting |
JP3 |
JP5 | |
| » |
Enabled |
pins 1 & 2, 3 & 4 closed |
closed |
|
Disabled |
all open |
open | |