AMERICAN MEGATRENDS, INC.
MEGARAID EXPRESS PLUS
Card Type |
Hard drive controller card |
Maximum Onboard Memory |
128MB DRAM |
Boot ROM |
Available |
Hard Drives supported |
Up to 15 SCSI devices |
Floppy drives supported |
None |
Data Bus |
32-bit PCI |
Card Size |
Full-length, full-height card |
CONNECTIONS | |||
Function |
Location |
Function |
Location |
68-pin SCSI wide connector - internal |
J2 |
4-pin connector - drive active LED |
J5 |
IC connector |
J3 |
68-pin SCSI 2 wide connector - external |
J6 |
9-pin serial port - internal |
J4 |
USER CONFIGURABLE SETTINGS | |||
Function |
Label |
Position | |
» |
Factory configured - do not alter |
J8 |
Pins 1 & 2 closed |
» |
Factory configured - do not alter |
J9 |
Pins 1 & 2 closed |
» |
Factory configured - do not alter |
J10 |
Pins 1 & 2 closed |
» |
Factory configured - do not alter |
J11 |
Open |
» |
Factory configured - do not alter |
J12 |
Open |
SCSI TERMINATION SELECTION | |
Setting |
J1 |
Software control of SCSI termination via drive detection |
Pins 1 & 2 closed |
Permanently disable all onboard SCSI termination |
Pins 2 & 3 closed |
Permanently enable all onboard SCSI termination |
Open |
DRAM CONFIGURATION | |
Size |
Bank 0 |
4MB |
(1) 1MB x 36 |
8MB |
(1) 2MB x 36 |
16MB |
(1) 4MB x 36 |
32MB |
(1) 8MB x 36 |
64MB |
(1) 16MB x 36 |
128MB |
(1) 32MB x 36 |