Card Type	Tape Drive/Floppy Drive adapter card
Tape/Floppy drives supported	Unidentified
Data Bus	8-bit ISA
Card Size	Three-quarter length, half-height card

CONNECTIONS
Function	Location	Function	Location
Fuse (1.0 Amp; +5 Volt DC)	F1	External Tape interface connector	J5
Fuse (2.0 Amp; +12 Volt DC)	F2	Internal Tape interface connector	J6
DC Power connector	J2	XT Floppy interface connector	J7
AT Floppy interface connector	J3	Resistor network	RN1
Controller interface connector	J4

BASE I/O ADDRESS SELECTION
Setting		JP1
»	3F2h	Pins 2 & 3 closed
	370h	Pins 1 & 2 closed

MISCELLANEOUS TECHNICAL NOTES

Adapter intended to be used with Archive Corporation tape drives (internal model 5540 and external model 3540C).