AEC6710F

HwMuseum | Index
ARTOP ELECTRONIC CORPORATION

AEC6710F

Card Type

Hard drive controller card

Hard Drives supported

Up to 7 SCSI-2 Fast devices

Floppy drives supported

None

Data Bus

32-bit PCI

Card Size

Full-height, quarter-length card

CONNECTIONS

Function

Location

Function

Location

50-pin SCSI connector - external

CN1

4-pin connector - drive active LED

JP3

50-pin SCSI connector - internal

CN2

USER CONFIGURABLE SETTINGS

Function

Label

Position

»
Termination power supply

JP2

Unidentified

»
Factory configured - do not alter

JP5

N/A

»
Flash ROM normal mode

JP6

Pins 1 & 2 closed

Flash ROM emergency mode

JP6

Pins 2 & 3 closed

Note: Jumper JP6 position 2 & 3 is for emergency use only. When the system has written to the Flash ROM more than 10, 000 times, an error message is posted that requests jumper JP6 be moved to pins 2 & 3. The flash ROM should then be replaced as soon as possible so normal mode can be resumed.

Card Type	Hard drive controller card
Hard Drives supported	Up to 7 SCSI-2 Fast devices
Floppy drives supported	None
Data Bus	32-bit PCI
Card Size	Full-height, quarter-length card

CONNECTIONS
Function	Location	Function	Location
50-pin SCSI connector - external	CN1	4-pin connector - drive active LED	JP3
50-pin SCSI connector - internal	CN2

USER CONFIGURABLE SETTINGS
Function		Label	Position
»	Termination power supply	JP2	Unidentified
»	Factory configured - do not alter	JP5	N/A
»	Flash ROM normal mode	JP6	Pins 1 & 2 closed
	Flash ROM emergency mode	JP6	Pins 2 & 3 closed
Note: Jumper JP6 position 2 & 3 is for emergency use only. When the system has written to the Flash ROM more than 10, 000 times, an error message is posted that requests jumper JP6 be moved to pins 2 & 3. The flash ROM should then be replaced as soon as possible so normal mode can be resumed.