ADAPTEC
ACB-5500
|
| |
|
Data bus: |
None (SCSI to ST506 interface) |
|
Size: |
Drive card |
|
Hard drives supported: |
SCSI to four RLL ST506 drives |
|
Floppy drives supported: |
None |
|
CONNECTIONS | |
|
Function |
Location |
|
34-pin control cable connector-hard drive(s) |
CN1 |
|
20-pin data cable connector-drive 0 |
J2 |
|
20-pin data cable connector-drive 1 |
J3 |
|
20-pin data cable connector-drive 2 |
J4 |
|
20-pin data cable connector-drive 3 |
J5 |
|
4-pin connector-DC power |
J7 |
|
50-pin SCSI connector-to host adapter |
J8 |
|
USER CONFIGURABLE JUMPERS | |||
|
Function |
Location |
Setting | |
| » |
SCSI bus reset is "hard" |
J6/jumper 1 |
closed |
|
SCSI bus reset is "soft" |
J6/jumper 1 |
open | |
| » |
Factory configured - do not alter |
J6/jumper 2 |
open |
| » |
LUN 0 is a hard-sectored drive |
J6/jumper 3 |
closed |
|
LUN 0 is not a hard-sectored drive |
J6/jumper 3 |
open | |
| » |
LUN 1 is a hard-sectored drive |
J6/jumper 4 |
closed |
|
LUN 1 is not a hard-sectored drive |
J6/jumper 4 |
open | |
| » |
Factory configured - do not alter |
J6/jumper 5 |
open |
| » |
Self-diagnostics enabled |
J6/jumper 6 |
closed |
|
Normal operation |
J6/jumper 6 |
open | |
| » |
SCSI parity check enabled |
J6/jumper 7 |
closed |
|
SCSI parity check disabled |
J6/jumper 7 |
open | |
|
SCSI ADDRESS | ||||
|
SCSI ID |
J6/jumper 8 |
J6/jumper 9 |
J6/jumper 10 | |
|
0 |
open |
open |
open | |
|
1 |
open |
open |
closed | |
|
2 |
open |
closed |
open | |
|
3 |
open |
closed |
closed | |
|
4 |
closed |
open |
open | |
|
5 |
closed |
open |
closed | |
|
6 |
closed |
closed |
open | |
| » |
7 |
closed |
closed |
closed |