Data bus:	8-bit, ISA
Size:	Half-length, full-height card
Hard drives supported:	Two IDE(AT) drives
Floppy drives supported:	None

CONNECTIONS
Function	Location
4-pin connector-Drive Active LED	J1
40-pin XT Interface (IDE) connector	J4

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	BIOS enabled	JP1	open
	BIOS disabled	JP1	closed
»	Hard drive enabled	JP6	closed
	Hard drive disabled	JP6	open

BIOS ADDRESS
Address		Jumper JP2	Jumper JP3
»	C800h	open	open
	CC00h	open	closed
	D800h	closed	open
	DC00h	closed	closed

INTERRUPT REQUEST
IRQ		Jumper JP4	Jumper JP5
»	Interrupt Request is IRQ5	open	closed
	Interrupt Request is IRQ2	closed	open